To Next PageTo Next PageTo Previous PageTo Previous Page
What to do if there's standing water in my Trane IntelliPak SCWF 20 Air Conditioner drain pan?
If you find standing water in the drain pan of your Trane Air Conditioner, it could be due to the unit not being level or a plugged drain line. To resolve this, ensure the unit is level and clean the drain line.
How to fix an overflowing drain pan in my Trane IntelliPak SCWF 20 Air Conditioner?
An overflowing drain pan in your Trane Air Conditioner can be caused by the unit not being level or a plugged drain line. You can fix this by leveling the unit and cleaning the drain line.
What to do if there's excess dirt in my Trane Air Conditioner unit?
If you notice excess dirt in your Trane Air Conditioner unit, the cause might be missing filters or filter bypass. Replace the filters if they are missing and reduce filter bypass.
General| Brand | Trane |
|---|---|
| Model | IntelliPak SCWF 20 |
| Category | Air Conditioner |
| Language | English |
Defines types of safety advisories (WARNING, CAUTION, NOTICE) used throughout the manual.
Emphasizes safety for field wiring and grounding during installation.
Details required PPE for installation and servicing to prevent hazards.
Instructs personnel to follow Environmental, Health, and Safety (EHS) policies for safe work practices.
Describes commercial self-contained units as complete HVAC systems with key features.
Covers standard controls including the Human Interface (HI) panel and Unit Control Module (UCM).
Lists optional controls such as disconnect switch, dirty filter switch, and others for unit customization.
Explains how to decode the unit model number by interpreting its digits.
Details the model number description specifically for air-cooled condenser units.
Provides general data including compressor, evaporator coil, condenser, and fan specifications.
Presents general data for air-cooled units, covering compressor and fan specifications.
Outlines procedures for receiving units and checking for shipping damage.
Guides on inspecting the unit exterior for damage and verifying nameplate data.
Details removal of protective covers and fan isolators for unit preparation.
Shows front, back, and top views with dimensions for various unit sizes.
Illustrates electrical connection details and provides filter data and dimensions.
Covers steam, hot water coils, and airside economizer dimensions and data.
Provides recommended service and code clearances required around the unit.
Details unit weights for various models and optional configurations.
Covers safe procedures for lifting and handling the unit, emphasizing proper rigging.
Warns about the dangers of improper lifting, which can cause serious injury or death.
Covers water piping, refrigerant system, leak testing, and charging procedures.
Guides on installing hydronic coils (steam and hot water) safely.
Explains power wiring, voltage ranges, and imbalance concerns.
Outlines critical safety procedures for electrical servicing.
Guides on installing the static pressure transducer for VAV units.
Details installation of zone sensors, remote interfaces, and communication wiring.
Provides instructions for installing and wiring the time clock option.
Outlines control sequences for unit operation, including modes and transitions.
Explains methods for switching between occupied and unoccupied modes for energy saving.
Details cooling sequences, including economizer use, mechanical cooling, and temperature control.
Covers airside economizer operation, comparative enthalpy, and damper control.
Describes the microelectronic control system and its constituent modules.
Explains RTM module capabilities, including inputs, outputs, and alarms.
Details GBAS module functions for building automation system integration.
Provides a checklist for verifying installation procedures before unit startup.
Provides specific startup considerations and procedures for air-cooled units.
Warns about hazards of working with live electrical components.
Details the procedure for performing the final refrigerant charge accurately.
Provides a procedure for establishing nominal startup conditions and recording data.
Explains how to access unit controls and components for maintenance.
Repeats capacitor discharge warnings before servicing any component.
Covers inspection, cleaning, tensioning, and alignment of fans and belts.
Details procedures for cleaning coil fins, refrigerant coils, and steam/hot water coils.
Introduces periodic maintenance checklists, including monthly tasks.
Details initial system checks and explains voltage imbalance effects.
Lists common unit problems, their causes, and recommended remedies.
Covers various diagnostic categories like sensor failures, communication issues, and operational limits.
Lists available unit wiring diagrams by number and description for reference.
