Chapter 2 Operator display
14 CNT-SVX05B-EN
6. To increase the contrast, press the buttons along the bottom row, in
sequence, from left to right. To decrease the contrast, press the
buttons from right to left.
7. Press the Home button. The home screen appears.
Setting up, changing, or disabling the security
password
To set up or change a security password or to disable its use:
1. On the home screen, press the Setup button. The Setup menu
appears.
2. Press the page down button to go to page 2 of 2.
3. Press the Display Setup button. The Display Setup menu appears.
4. Press the page down button to go to page 2 of 2.
5. Press the Setup Security Password button. The Setup Security Pass-
word screen appears.
6. To set up or change the password, use the number keys to enter 4 to 8
numbers. Press OK. Security is enabled.
Note:
If security is enabled, the logon screen will display whenever
you try to change a value that is security protected. To log on,
type the password using the numeric type pad. You will remain
logged on while you continue to work. After 20 minutes, the sys-
tem will log you off.
Note:
If a password was previously set up, a Disable Security button
appears on the Setup Security Password screen. Press the Dis-
able Security button to disable security.
To Next Page
Loading...
Need help?
General
