Ubee Interactive Using the DDNS Option
Ubee DDW36C Advanced Wireless Gateway MSO Operations Guide • October 2015 39
5.5 Using the DDNS Option
Use the dynamic domain name system (DDNS) to assign a changing IP address to a
constant pre-defined host name. The host can then be contacted by other hosts on the
Internet, even if its IP address changes.
The DDNS service for the DDW36C is provided through a third-party and can be
purchased from Dynamic Network Services Inc. at www.dynDNS.com.
To use the DDNS option:
1. Click Basic from the main menu.
2. Click DDNS from the left side menu. Field descriptions are listed below the screen
example.
IP Address Displays the IPv6 address of the client.
MAC Address Displays the MAC address of the client connected to the
device with an IPv6 address.
Reachability State Displays whether the client is reachable or unreachable by
neighboring nodes.
Label Description
DDNS Service Enables or disables the DDNS service. When enabled, this
service is available from www.dynDNS.org.
User Name Defines the user name for the DDNS account.
Password Defines the password for the DDNS account.
Host Name Defines the host name for the DDNS account.
Label Description
To Next Page
Loading...
Need help?
General
