UNI-T UPO2000CS Series User Manual

UPO2000CS series User Manual
86
Pulse Condition
>、<、=
Polarity Positive, negative
Pulse Width
Range
8ns~10s
Beyond-range Pulse Trigger
Beyond-range
type
Rising, falling, any
Trigger Position Entering, exiting, time
Beyond-range
time
8ns~10s
N-edge Trigger
Edge Type Rising, falling
Free Time 8ns~10s
Edge Count 1~65535
Delay Trigger
Edge Type Rising, falling
Delay Type Greater than, less than, within scope, outside scope
Delay Time
Normal：8ns~10s
Time lower limit：8ns~10s
Time upper limit：36ns~10s
Overtime Trigger
Edge Type Rising, falling, any
Timeout 8ns~10s
Duration Trigger
Pattern Type H, L, X
Trigger Condition Greater than, less than, within range
Duration Time
Normal：8ns~10s
Time lower limit：8ns~10s
Time upper limit：36ns~10s
Setup/hold Trigger
Edge Type Rising, falling
Data Type H, L
Setup Time 8ns~10s
Hold Time 8ns~10s
Slope Trigger
Slope Condition
Positive slope (greater than, less than, specified range)
Negative slope (greater than, less than, specified range)

UNI-T UPO2000CS Series Specifications

General

Brand	UNI-T
Model	UPO2000CS Series
Category	Test Equipment
Language	English