UNI-T UTL8500X Series User Manual

Programable DC Electronic Load User Manual
59
PD trigger delay Set the waiting time before initializing PD power
CC channel detection Check whether the CC1 and CC2 leads are connected well
6. System Configuration Page
● System Configuration
● Parameter Setting
● File
● Instrument Info
● Local/Remote
In non-running status, pressing the [System] button on the panel can enter the system
configuration page. The system configuration page includes <System Config>, <Para
Set>, <File>, <Info> and Local/Remote switching. Select the corresponding function keys
at the bottom of the panel to enter the corresponding setting page.
6.1 System Configuration
Press the [System] button on the panel to enter the <SYSTEM CONFIG> page, as shown
in Figure 6-1. Language, time, communication, etc. can be set on this page. For details,
please see Table 6-1.
Figure 6-1 System Configuration Page
Table 6-1 Parameters on System Configuration Page
System parameter Setting content Description
Language [CHN]/ENGLISH Set system language

UNI-T UTL8500X Series Specifications

General

Brand	UNI-T
Model	UTL8500X Series
Category	Measuring Instruments
Language	English