Making calls using identification codes 75
Directed assignment of an MSN (multiple
subscriber number)
Multiple subscriber numbers are phone numbers belonging to an ISDN multiple
device line. They are used for the directed addressing of terminals, for example
when a fax machine has a separate number. Before selecting an external
connection, you can directly assign a configured multiple subscriber number.
The assigned number then appears on the called party's display.
This function can also be called directly by entering the code page 39.
Press and hold down the Talk key.
Open the system menu.
s t w Select the menu item and confirm.
s t w Select the menu item and confirm.
o Enter the required MSN (for example111).
o Enter the required external phone number. The phone number is dialed.
Making calls using identification codes
In the case of calls you make to external partners, you can enter and charge
the call costs on the basis of individuals, customers, accounts and private calls,
for example, by means of account codes. The account code (ACCT) can
contain up to 11 characters and is included in the data printout. The ACCT is
only transferred after a call has been completed. The ACCT can be entered
before and during the external call.
This function can also be called directly by entering the code page 39.
Press and hold down the Talk key.
Open the system menu.
s t w Select the menu item and confirm.
s t w Select the menu item and confirm.
o Enter the required account code (optional).
Save the settings.
o Enter the external phone number. The phone number is dialed.
Menu
Service?
*
41=Temporary?
MSN no.111
111:
Menu
Service?
*
60=
Account code?
Project code:
Save
Please dial.
Note:
If a call is transferred, the costs are still assigned to the ACCT entered.
To Next Page
Loading...
Need help?
General