78 Call charge display
Activating/deactivating do not disturb
You can block calls to your handset on a temporary basis, while still being able
to make calls yourself. Internal callers hear the busy tone, while external callers
reach another telephone defined by the service engineer (intercept position).
Authorized internal callers automatically override the DND feature after five
seconds.
Activating do not disturb
Press and hold down the Talk key.
Open the system menu.
s t w Select the menu item and confirm.
a Press the End call key to end the operation.
Deactivating do not disturb
Press and hold down the Talk key.
Open the system menu.
s t w Select the menu item and confirm.
a Press the End call key to end the operation.
Call charge display
After a call has ended, the display shows the connection charges for the current
call as standard. If the costs are to be displayed continuously during an
outgoing call, this function must be requested from the carrier.
You can check and display the call charges for your phone number as a total for
a period that can be set by the service engineer.
First the call charges for the last charged call are displayed. The total call
charges are displayed after five seconds.
This function can also be called directly by entering the code page 39.
Press and hold down the Talk key.
Open the system menu.
s t w Select the menu item and confirm.
s t w Select the menu item and confirm.
a Press the End call key to end the operation.
Menu
Do not disturb ON?
Menu
Do not disturb OFF?
Note:
If a call is transferred, the costs are assigned to the telephone to which
the call was transferred from this point onwards.
Menu
Service?
*
65=Show call char-
ges?
To Next Page
Loading...
Need help?
General