11.Certifications
This section contains information about certificates and declarations valid for UniversalRobots
robots with OEM controllers.
11.1. Shipping materials
As stated by our suppliers, UniversalRobots robots shipping materials comply with the ISPM-15
requirements for producing wood packaging material and are marked accordingly.
11.2. Certification of quality
UniversalRobots robots undergo continuous internal testing and end-of-line test procedures. UR
testing processes undergo continuous review and improvement.
11.3. Declarations according to EU directives
UniversalRobots robots are certified according to the following directives.
•
2006/42/EC – Machinery Directive (MD)
According to the Machinery Directive 2006/42/EC, UniversalRobots robots are partly
completed machinery, and do not have a CE mark on them.
The declaration of incorporation according to 2006/42/EC annex II 1.B. is in section EU
Declarations of Incorporationbelow and EU Declarations of Incorporationbelow.
•
2011/65/EU – Restriction of the use of certain Hazardous Substances (RoHS)
See section China RoHSon page38.
•
2012/19/EU – Waste of Electrical and Electronic Equipment (WEEE)
For information on disposal of electrical and electronic equipment waste, refer to chapter7,
Disposal and Environment in the robot user manual.
EU Declarations of Incorporation
Installation Guide OEM Control Box
Copyright © 2019–2024 by UniversalRobotsA/S. All rights reserved.
To Next Page
Loading...
Need help?
General
