4-4
Copying Functions
Selecting the Multi Purpose Tray
Change the paper size and media type.
The available paper sizes and media types are shown in the table below.
NOTE: You can conveniently select in advance the size and type of paper that will be used often and set them as
default (refer to Paper Size and Media Type Setup for Multi Purpose Tray on page 8-14).
Use the procedure below to select the paper size and media type.
1 Press the Copy key.
2 Place the original.
3 Press the Function Menu key. Function Menu appears.
4 Press the ļ² or ļ³ key to select [Paper Selection].
Category Item Sizes
Paper
Size
Standard
Sizes
Letter, Legal, Statement, Executive, Oficio II,
A4, A5, A6, B5, B6, Folio, 216 Ć 340mm, 16K
Other ISO B5, Envelope #10, Envelope #9,
Envelope #6, Envelope Monarch, Envelope
DL, Envelope C5, Hagaki, Oufuku Hagaki,
Youkei 4, Youkei 2 and Custom*
* For instructions on how to specify the custom paper size (Custom),
refer to Adding a Custom Size and Media Type for Paper to Print on
page 8-10.
Size
Entry**
** The input units can be changed in the System menu.
Refer to Switching Unit of Measurement on page 8-24.
Inch models
Horizontal: 5.83 to 14.02" (in 0.01" increments),
Vertical: 2.76 to 8.50" (in 0.01" increments)
Metric models
Vertical: 70 to 216 mm (in 1 mm increments),
Horizontal: 148 to 356 mm (in 1 mm
increments)
Media
Type
Plain, Transparency, Rough, Vellum, Labels, Recycled,
Preprinted***, Bond, Cardstock, Color, Prepunched***,
Letterhead***, Envelope, Thick, High Quality, Custom 1 to
8***
*** For instructions on how to specify the custom paper types 1 to 8,
refer to Media Type Set on page 8-16.
To print on preprinted or prepunched paper or on letterhead, refer to
Special Paper Action on page 8-21.
To Next Page
Loading...
Need help?
General
