Utax P-3020 MFP User Manual

8
8-141
Default Setting (System Menu)
25 Press the OK key. Completed. is displayed and the
screen returns to the IPv4 Setting menu.
26 Press the  or  key to select [Default Gateway].
27 Press the OK key. Default Gateway appears.
28 Use the arrow keys to enter the Default Gateway.
Press the  or  key to move the cursor position
horizontally.
Press the  or  key or the numeric keys to enter the
Default Gateway. Each 3 digits can be set between 000
and 255.
IMPORTANT: When the DHCP Setting (page 8-142) is [On],
the current Default Gateway is displayed and cannot be
changed.
When setting an Default Gateway, set the DHCP Setting
(page 8-142) to Off.
29 Press the OK key. Completed. is displayed and the
screen returns to the IPv4 Setting menu.
IPv4 Setting: a b
3 IP Address
4 Subnet Mask
*********************
[ Exit ]
5 Default Gateway
Default Gateway: a b
000 .000.000.000

Utax P-3020 MFP Specifications

General

Brand	Utax
Model	P-3020 MFP
Category	All in One Printer
Language	English