Utax P-3020 MFP User Manual

4
4-19
Copying Functions
Backgrnd Density
Removes dark background from originals, such as newspapers.
If the ground color is obtrusive, select [Auto]. If [Auto] does not remove the ground color, select [Manual] and adjust
the density of the ground color.
The setting items are as follows.
The procedure for adjusting the background density of copies is explained below.
1 Press the Copy key.
2 Place the original.
3 Press the Function Menu key. Function Menu appears.
4 Press the  or  key to select [Backgrnd Density].
5 Press the OK key. Backgrnd Density appears.
6 Press the  or  key to select [Off], [Auto] or [Manual].
7 Press the OK key.
When [Manual] is selected, Manual appears. Press the
 or  key to select [1 (Lighter)] to [5 (Darker)] and then
press the OK key.
Completed. is displayed and the screen returns to the
basic screen.
8 Press the Start key. Copying begins.
NOTE: Press the Reset key to reset the settings selected in
Function Menu.
Item Description
Off Does not adjust the ground color.
Auto Automatically adjusts the background density based on the original.
Manual Manually adjust the density in 5 levels. When [Manual] is selected, press [1 (Lighter)] to
[5 (Darker)] to adjust the background density.
Function Menu: a b
*********************
2 Collate T
3
Duplex T
[ Exit ]
1 Paper Selection T
Backgrnd Density: a b
*********************
2 Auto
3 Manual
1 *Off
Manual: a b
3 3
4 4
*********************
5 *5 (Darker)

Utax P-3020 MFP Specifications

General

Brand	Utax
Model	P-3020 MFP
Category	All in One Printer
Language	English