2
Preparation before Use
2-9
Switching the Language for Display [Language]
Select the language displayed on the Message Display.
Use the procedure below to select the language.
1 Press the Power switch.
2 Press the System Menu/Counter key on the main unit
operation panel.
When you are performing user management and have
not logged in, a login screen will appear. Then, enter the
user ID and password to log in.
NOTE: The following administrator is registered in the
machine at the factory.
Login User Name:30 ppm model:3000, 35 ppm model:3500
Login Password:30 ppm model:3000, 35 ppm model:3500
Refer to Character Entry Method on Appendix-5 for details
on entering characters.
3 In the Sys. Menu/Count. menu, press the ļ² or ļ³ key to
select [Common Settings].
4 Press the OK key. The Common Settings menu appears.
5 Press the ļ² or ļ³ key to select [Language].
To Next Page
Loading...
Need help?
General
