Utax P-3020 MFP User Manual

8-140
Default Setting (System Menu)
20 Use the arrow keys to enter the IP address.
Press the  or  key to move the cursor position
horizontally.
Press the  or  key or the numeric keys to enter the
IP Address. Each 3 digits can be set between 000 and
255.
IMPORTANT: When the DHCP Setting (page 8-142) is [On],
the current IP address is displayed and cannot be changed.
When setting an IP address, set the DHCP Setting (page 8-
142) to Off.
21 Press the OK key. Completed. is displayed and the
screen returns to the IPv4 Setting menu.
22 Press the  or  key to select [Subnet Mask].
23 Press the OK key. Subnet Mask appears.
24 Use the arrow keys to enter the Subnet Mask.
Press the  or  key to move the cursor position
horizontally.
Press the  or  key or the numeric keys to enter the
Subnet Mask. Each 3 digits can be set between 000 and
255.
IMPORTANT: When the DHCP Setting (page 8-142) is [On],
the current Subnet Mask is displayed and cannot be
changed.
When setting an Subnet Mask, set the DHCP Setting (page
8-142) to Off.
IP Address: b
123.145.167.189
IPv4 Setting: a b
3 IP Address
*********************
5 Default Gateway
[ Exit ]
4 Subnet Mask
Subnet Mask: a b
000 .000.000.000

Utax P-3020 MFP Specifications

General

Brand	Utax
Model	P-3020 MFP
Category	All in One Printer
Language	English