Preparation before Use
2-30
NOTE: Here, information on the FAX settings has been omitted. For more information on using the FAX, refer to the
FAX Operation Guide.
Accessing Embedded Web Server RX
1 Launch your Web browser.
2 In the address or location bar, enter the machine's IP address or the host name.
Examples: https://192.168.48.21/ (for IP address)
https://MFP001 (if the host name is "MFP001")
The web page displays basic information about the machine and Embedded Web Server RX as well as their
current status.
NOTE: If the screen “There is a problem with this website's security certificate.” is displayed, configure the
certificate. For details on Certificates, refer to the Embedded Web Server RX User Guide.
You can also continue the operation without configuring the certificate.
3 Select a category from the navigation bar on the left of the screen. When you log in to the machine as an
administrator, you will see Device Settings, Function Settings, Network Settings, Security Settings, and
Management Settings.
To Next Page
Loading...
Need help?
General
