Setup and Registration
6-25
6
9 Press the or key to select the desired
encryption key number.
10 Press the OK key.
11 Press the or key to select [On] or [Off].
NOTE: When the machine receives originals, the
encryption box is not used.
12 Press the OK key. Proceed to the next step or step
15 when [On] or [Off] is selected in step 11,
respectively.
13 Use the numeric keys to enter the box number
(0000 to 9999).
14 Press the OK key.
15
Press the Start key. The transmission will start.
NOTE: When On is selected in Destination Check
before Send, a destination confirmation screen is
displayed when you press the Start key. For details,
refer to Confirmation Screen of Destinations on
page 5-13.
Operation at the Receiving System
To conduct encryption communication operating the receiving system, follow the steps below.
NOTE: In encryption communication, sub address communication cannot be used.
1 Register the encryption key you have arranged
with the sending system. (Refer to Registering an
Encryption Key on page 6-22.)
2 Refer to Basic Operation Procedure on page 6-7.
Encryption Key:
a
b
*********************
2
*Key 02
3
Key 03
1
----------------
Encryption Box:
a
b
*********************
2
On
1
*Off
Box Number Entry:
M
b
(0000 - 9999)
****0000*
To Next Page
Loading...
Need help?
General
