To Next Page

To Previous Page

FAX Operation (Advanced)

4-29

Sub Address Communication

Sub address communication is communication in which data is sent and received with sub addresses and

passwords attached in conformance with the ITU-T (International Telecommunication Union)

recommendations. Sub addresses enable communication modes with third-party machines that were

previously only possible between our brand machines. These include confidential delivery (sending originals to

an original delivery box set up in the receiving system) and polling communication (reception of documents from

a source machine that is controlled from the receiving machine). Using sub address communication on this

machine also allows advanced communication functions such as storing received originals in Sub Address

Boxes.

NOTE: In order to conduct sub address communication, the other party’s system also needs to be equipped

with sub address communication functions of the same type.

Sub address-based communication can be used together with various kind of functional communication. When

registering a sub address and sub address password in the Address Book and One-touch keys, you can omit

their entry before transmission. For details, refer to the explanations in the procedure of each communication

method and registration method.

Sub Address

With the machine, sub address and sub address passwords are called sub address.

Sub Address

Use the numbers from 0 to 9, ‘ (space)’, and ‘#’ and ‘*’ characters to enter a sub address of up to 20 digits. When

the machine receives originals, the sub address is used as the forward requirement for memory forwarding.

Sub Address Password

Use the numbers from 0 to 9, alphabets, ‘ (space)’, and ‘#’ and ‘*’ characters to enter a sub address password

of up to 20 digits. When the machine receives originals, a sub address password is not used.

Sub Address Transmission

To use sub address transmission, follow the steps below.

NOTE: To use sub address transmission, check that a sub address and password have been set in the

receiving system in advance.

When sub address transmission is used, encryption cannot be used.

For the setting method when the machine receives originals, refer to Sub Address Box Function on page 4-32.

1 Press the FAX key.

2 Place the originals.

Utax P-C2665 MFP User Manual Fax System

Other manuals for Utax P-C2665 MFP