Preparation Before Use
2-2
Selection of Telephone Line (Inch version only)
Select the telephone line according to the type you are contracted with. Please note that selecting a wrong
telephone line will prevent you from sending fax.
1 Press the System Menu/Counter key.
2 Press the or key to select [FAX].
3 Press the OK key.
4 Press the or key to select [Transmission].
5 Press the OK key.
6 Press the or key to select [FAX Dialing
Mode].
7 Press the OK key.
8 Press the or key to select [Tone(DTMF)] ,
[Pulse(10pps)] or [Pulse(20pps)] according to the
type of telephone line you are contracted with.
9 Press the OK key.
FAX:
a
b
1
TX/RX Common
*********************
3
Reception
[ Exit ]
2
Transmission
Transmission:
a
b
3
Local FAX ID
4
Local FAX Number
*********************
[ Exit ]
5
FAX Dialing Mode
FAX Dialing Mode:
a
b
*********************
2
Pulse(10pps)
3
Pulse(20pps)
1
*Tone(DTMF)
To Next Page
Loading...
Need help?
General
