Utax P-C2665 MFP User Manual Fax System

Part Names and Functions
1-2
Operation Panel
For the names of keys and indicators required when functions other than FAX are used, refer to the machine’s
Operation Guide.
Blinks while the
machine is
accessing the
memory.
Message Display. Check what is shown
here while operating the machine.
Blinks during printing and
transmission/reception.
Selects the menu displayed
at the lower left in the
Message Display.
Selects the menu displayed
at the lower right in the
Message Display.
Switches between on-hook and off-hook when
manually sending a FAX.
Shifts to switch the one-touch key numbers
(1 to 11 and 12 to 22).
Lamp is lit while shifted (12 to 22).
Destinations can be checked and added.
Calls the previous destination. Also used to enter a
pause when entering a FAX number.
Displays the Address Book screen, where you can add destinations.
Used to call destinations
registered to the one-touch key
numbers (1 to 22).
Also used to register and
delete call destinations.
Displays the
Copy screen.
Displays the FAX screen.
Displays the Send screen.
Displays the Document Box screen.
Displays the Status/Job Cancel
screen.
Displays the System Menu/Counter
menu screen.
Not used in fax mode.

Utax P-C2665 MFP Specifications

General

Brand	Utax
Model	P-C2665 MFP
Category	All in One Printer
Language	English