5-34
Operation on the Machine > Using a Custom Box
Editing and Deleting Custom Box
1
Display the screen.
[System Menu/Counter] key > [ā²] [ā¼] key > [Document Box] > [OK] key > [ā²] [ā¼] key >
[Custom Box] > [OK] key > [ā²] [ā¼] key > [Detail/Edit] > [OK] key
2
Edit the custom box.
To edit
1 Select the box you want edit and select the [OK] key.
2 Change the box information.
To delete
1 Select the box you want delete and [Menu].
2 [ā²] [ā¼] key > [Delete] > [OK] key > [Yes]
Storing Documents
Custom box stores the print data which is sent from a PC. For the operation of the printing from the PC, refer to the
following:
Printing System Driver User Guide
ā¢ When you have logged in as a user, you can only edit a box whose owner is set to that
user.
ā¢ When you have logged in as administrator, you can edit all boxes.
ā¢ If a custom box is protected by a password, enter the correct password.
Creating a New Custom Box (page 5-32)
ā¢ When you have logged in as a user, you can only delete a box whose owner is set to
that user.
ā¢ When you have logged in as administrator, you can delete all boxes.
To Next Page
Loading...
Need help?
General
