9-30
User Authentication and Accounting (User Login, Job Accounting) > Setting an Account
Editing an Account
This changes the registered account information.
1
Display the screen.
1 [System Menu/Counter] key > [ā²] [ā¼] key > [User/Job Account] > [OK] key
2 [ā²] [ā¼] key > [Job Account.Set.] > [OK] key > [ā²] [ā¼] key > [Account. List] > [OK] key
2
Edit an account.
1 Select the account you want to change and select the [OK] key.
2 Refer to step 2 of "Adding an Account" and "Restricting the Use of the Machine" to change
account information.
3 [OK] key > [Yes]
The account information is changed.
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name: 3000
Login Password: 3000
The account information can be changed by selecting [Menu], selecting [Detail/Edit] and
then selecting the [OK] key.
Adding an Account (page 9-27)
Restricting the Use of the Machine (page 9-29)
To Next Page
Loading...
Need help?
General
