8-26
Setup and Registration (System Menu) > System Menu
System/Network
Configures machine system settings.
Network Setting
[
System Menu/Counter
] key > [
ā²
] [
ā¼
] key > [
System/Network
] > [
OK
] key > [
ā²
] [
ā¼
] key > [
Network Setting
] > [
OK
] key
Configures network settings.
Host Name
TCP/IP Settings
Item Description
Host Name
Check the host name of the machine. Host name can be changed from Embedded Web Server RX.
Changing Device Information (page 2-42)
Item Description
TCP/IP Set up TCP/IP to connect to the Windows network.
Value: Off, On
IPv4 Setting Set up TCP/IP (IPv4) to connect to the network.
DHCP Select whether or not to use the DHCP (IPv4) server.
Value: Off, On
Auto-IP Select whether to use Auto-IP.
Value: Off, On
IP Address Set the IP addresses.
Value: ###.###.###.###
If DHCP is set to [On], this item is displayed only and cannot be entered.
Subnet Mask Set the IP subnet masks.
Value: ###.###.###.###
If DHCP is set to [On], this item is displayed only and cannot be entered.
Default Gateway Set the IP gateway addresses.
Value: ###.###.###.###
If DHCP is set to [On], this item is displayed only and cannot be entered.
IPv6 Setting Select whether to use IPv6.
Value: Off, On
This setting is available when [TCP/IP] is [On].
The IPv6 settings are configured from the Embedded Web Server RX.
Embedded Web Server RX User Guide
Bonjour Select whether or not to use Bonjour.
Value: Off, On
After changing the setting, restart the network or turn the machine OFF and then ON.
To Next Page
Loading...
Need help?
General
