52
The HALF-KETTLE HEATING button
activates the heating only with heater
which is positionated in the lower part of the kettle. The button can be
switched on during the heating cycle and is active only during the running
program. The function cannot be stored.
Press the button to start a half heating
(lower) of the kettle.
3. On the display show picture. If you
again press the button the picture
disappear so mean that the machine
working with both heaters.
7.2.1.5 key HEATING AT 85°C
The HEATING button is pre-set to the program ice cream mixture heating at
85°C.
1. Press the button to start pre-set
program 26.
2. The machine will start mixing and heating
the mixture up to 85°C. The front display
interacts with users giving them instructions
and information about the processing. The
end of the cycle is notified by a beep and a
light signal (if any). A message is displayed
to take out the mixture. The machine will
continue mixing the mixture without heating
until extraction, i.e. until the end of the
maximum time limit.
7.2.1.6 key STOP / RESET
The STOP button stops all active function, operation, program of the
machine indifferently in which phase the machine is. The HOME screen is
displayed.
To Next Page
Loading...
Need help?
General
