Valmar MULTY P TTi Series User Manual

9
With the intention to provide our customers with a well-tested appliance, ready
for normal operation, the initial start-up is always carried out at the factory by
the manufacturer before the product is packed and shipped to our client.
Additional start-up and appliance's adjustments can be made on the client's
premises by technicians authorized by VALMAR.Set the appliance in a suitable
place, block it to ensure stability, and connect to the water and power supplies.
Blocked and connected appliance is ready for operation.
The price of the appliance does not include installation costs and the cost of the
demonstration of its operation.
The warranty does not include replacements or repairs of malfunctions caused
by incorrect connection of the appliance.
The quality and the quantity of the ice cream depend on:
 temperature of the cooling water;
 temperature of air;
 final temperature of the ice cream;
 quantity and quality of the ice cream mixture;
 desired consistency of ice cream;
 increase in the volume of ice cream.
The mixture is poured into the treating cylinder and then pressing AUTOMATIC
key. The mixture is heated up to treating temperature (85°C) and then
maintained at treating temperature until is poured into processing cylinder.
Hot mixture is introduced inside the production cylinder. The production of ice
cream - mass is started by pressing the ICE CREAM key or START key.
The machine cools the mixture (mass, ice cream) until the final density (or up to
the final temperature or the preset time) of ice cream.
DUAL machine can heating and cooling some mixture or cream in production
cylinder by pressing the START key (actual program).
Ice cream, mass is extraced out through the ejection hole into the vessel by
pressing EXTRACTION key.
Operations of the appliance:
 Kettle - heating part:
 mixing and heating the mixture in the treating cylinder up to the
predetermined temperature (85°C) and then maintenance at the
predetermined temperature (AUTOMATIC HEATING ),
Caution must be taken because the outlet valve and the pipe are
heated because they are exposed at hot mixture. Danger of scalding!
 mixing and heating the mixture in the cylinder of preparation up to the
selected temperature trough the selected program (START );




Valmar MULTY P TTi Series Specifications

General

Brand	Valmar
Model	MULTY P TTi Series
Category	Ice Cream Maker
Language	English