80
If the DOWN button is grey the decreasing of the maintenance time is not
allowed.
In the most programs the permeted changing of the maintenance time is saved.
See the relevant program info to check whether changes are stored. If changes
are NOT stored they will be valid only for the running program!
The new parameter is valid and used during the running program and will be
valid and used when running the program in future.
9.2 MENU PROGRAMS of the COOLING PART
9.2.1 HOW ACCESS TO THE PROGRAM MENU:
1. Press the right part (cylinder) on the dual
inactive HOME screen to enter in the single
inactive home screen.
2. On the single inactive home screen press
the TOOLS button to enter in SETTINGS
screen.
3. Press the PROGRAMS button to
enter the PROGRAM MENU.
T
ips: SHORTCUT to the program menu screen.
You can quickly enter the program menu by pressing
the START CYCLE button
4. Select one of the available menus
represented by the relevant icons:
Ice cream menu;
Sorbet, slush, fruit sauce and
topping menu;
Chocolate ice cream, ganache,
chocolate sauce and topping menu;
Pastry products menu for custard
cream, panna cotta, Bavarian cream,
etc;
Gastronomy products menu for
salted creams, sauces, soups, etc;
…Factory program menu.
Select one of the icons representing the various
To Next Page
Loading...
Need help?
General
