12
2.3 Installing the paper receipt roll
1. Open the paper roll
compartment by holding the
terminal base securely and
lifting the sides of the paper
compartment door upwards
and back.
2. Remove any partially used
or empty paper roll from
the compartment.
3. Place a new roll in the
compartment. Ensure that
the paper end is feeding
under the roll and towards
the terminal screen.
4. Pull the end of the paper above
the paper compartment door.
5. Close the paper compartment
door until it clicks securely back
into position.
6. Tear off and discard any
surplus paper.
Important: The paper roll is thermal-sensitive and will only print on one side.
2.4 Charging your terminal
Your terminal arrives charged and ready for use.
Ensure the base of your terminal is
connected to a power source and
place your terminal on the base.
The terminal will automatically
turn on.
The charging symbol will be
displayed at the top of the screen.
The charging indicator LED (see
Terminal layout) will be orange while
the terminal is charging.
When the terminal is fully charged
the charging indicator LED will
be green.
To Next Page
Loading...
Need help?
General
