Controls
This chapter describes the controls sold by Volvo Penta for your engine.
Disengaging the shift function
The shift function can be disengaged so that the con-
trol lever only affects the engine speed.
1. Move the lever to the neutral position (N)
2. Press the neutral button (N) in and hold it down
while moving the control lever forward to the shift
position (F).
3. Release the neutral button. The green indicator
begins to flash to acknowledge that the shift func-
tion is disengaged.
The lever now only controls engine speed.
When the lever is moved back to the neutral position it
will automatically re-engage. This is confirmed by the
green indication which gives constant light.
WARNING! Take care not to engage the drive-
unit unintentionally.
Electronic lever control
Operation
Both the shift function and engine speed control are
controlled using the lever control.
N = Neutral position (Drive-unit is disengaged and the
engine runs at idle speed).
F = Drive-unit engaged for movement ahead.
R = Drive-unit engaged for movement astern.
T = Adjustment of engine speed.
NOTE! The engine can only be started if the Control
lever is in the neutral position.
44
To Next Page
Loading...
Need help?
General
