INSTRUMENTS AND CONTROLS 127
SLEEPER CONTROL PANEL (SLEEPER MODELS
ONLY)
The sleeper control module is located behind the driver’s seat. It provides precise
temperature control to the sleeper unit. There are separate temperature and fan control
systems for the sleeper and the cab area. The driver can control the fan speed in the sleeper
using a control switch on the dash. Also, radio controls are available.
Note: If an error occurs while using the Sleeper Control Panel, restart the unit to verify if
the error clears out. If the error continues to appear on the unit’s display screen, bring in
the vehicle for servicing.
CAUTION
To avoid component damage, do not use
alcohol based cleaners on the Sleeper
Control Panel display screen.
CAUTION
Do Not place magnets or electro-magnetic
devices near the Sleeper Control Panel.
Doing so may result in damage to the
module.
W3005382
To Next Page
Loading...
