INSTRUMENTS AND CONTROLS 193
SLEEPER BUNKS
General
Upper and lower bunks are available in the VN 780, 730, 670 and 630 models. The lower
bunk is standard while the upper bunk is optional. The VN 430 and VHD 430 are equipped
with one lower bunk.
The bunks for the VN 670, 630, 430 and VHD 430 cover the luggage compartment. They
are hinged for access to luggage from inside of the cab.
To gain access, release the latch mechanism and lift by the edge of the bunk platform. Gas
springs aid in opening and closing the platform in some models.
The upper bunks for the VN 780, 670 and 630 may also be hinged (optional), and can be
raised out of the way. The VN 670 and VN 630 use the safety bunk harness latch to hold up
the bunk. The VN 780 has latches on both sides of the wall that hold the bunk in position.
To release the latches, pull the latch strap in the middle of the bunk underside.
When the bunk is raised and latched, make sure that the latches on both sides close and hold
the bunk properly. For more information on bunk safety restraints, see “Safety Restraint VN
430, VN 630, VN 670 and VHD 430” page 268.
To Next Page
Loading...
Need help?
General
