304 OPERATION
Note: Read the Eaton VORAD Collision Warning System Driver Reference Manual before
taking a vehicle equipped with VORAD out on the road.
CAUTION
On vehicles equipped with Eaton VORAD
SmartCruise, cruise control is disengaged
in the event the SmartCruise system fails
to operate. You must stop the truck,
turn the ignition off and on, and activate
the control twice in order for the cruise
control to operate.
Acceleration
Momentary acceleration (such as for passing another vehicle) does not interrupt cruise
control operation. After passing, release accelerator and let the vehicle slow to cruise control
speed. The previously set speed will then be maintained without having to set the switch
to RESUME.
Volvo Engine Brake (I-VEB)
The Volvo Engine Brake (I-VEB) is standard on the Volvo 16F engine and optional on the
13F engine. It has a higher braking effect than the variable geometry turbo brake.
When the engine brake is in the A position and cruise control is engaged, the engine brake
automatically engages if vehicle speed exceeds the set cruise control speed. The I-VEB will
engage with infinite control (within the limits of the engine brake) to maintain that speed.
The Volvo Engine Brake (I-VEB) is standard on the Volvo 16F engine and optional on the
13F engine. It has a higher braking effect than the variable geometry turbo brake.
When the engine brake is in the A position and cruise control is engaged, the engine brake
automatically engages if vehicle speed exceeds the set cruise control speed. The I-VEB will
engage with infinite control (within the limits of the engine brake) to maintain that speed.
To Next Page
Loading...
Need help?
General
