368 OPERATION
Operating the Fifth Wheel Slider
CAUTION
The trailer must be stopped and the
trailer brakes locked, or damage to the
tractor and/or trailer may result from
uncontrolled sliding of the fifth wheel.
Stop the tractor and trailer in a straight line on level ground.
Lock the trailer brakes by pulling out the Trailer Supply knob.
Release the slide locking plungers by moving the switch to the "UNLOCK" position (press
down the latch and push in the bottom part of the switch).
W3006383
Check to see that both of the slide plungers have released. If the plungers do not come out,
lower the landing gear to relieve the pressure on the plungers. Lowering the landing gear
will also allow the fifth wheel to slide easier.
To Next Page
Loading...
Need help?
General
