108
5. Use the dialing keys to enter a two-digit number.
6. Press SELECT or
SAVE
Note: Remote access can only be used if this function
is activated.
MESSAGE ALERT TONE
When the message alert tone is set to On, and there is
at least one new message, the telephone base beeps
every ten seconds.
Unless you change it, the message
alert tone is set to off.
There is no audible alert at the handset.
To turn the message alert tone on or off:
1. Press MENU or
MENU in idle mode to enter the
main menu.
2. Press
/ or / to highlight Answering sys, then
press SELECT or SELECT.
3. Press
/ or / to highlight Ans sys setup, then
press SELECT or SELECT.
4. Press
/ or / to highlight Msg alert tone, then
press SELECT or SELECT.
5. Press
/ or / to highlight On or Off.
6. Press SELECT or SELECT
ANSWERING SYSTEM AND VOICEMAIL
To Next Page
Loading...
Need help?
General
