BA DT10 en - Edition 1.5 * dt10b610.fm 6-5
Technical data
6.13 Noise levels
Sound power level measurement based on Directive 2000/14/EC. Operator-per-
ceived noise level measured in compliance with EU Directives 84/532/EEC, 89/
514/EEC and 95/27/EEC. Measurements performed on asphalted surface.
6.14 Vibration
Sound power level
Model DT10
Sound power level (L
WA
)
1
1. According to ISO 6395
101 dB(A)
Operator-perceived sound pressure
level (L
PA
)
2
2. According to ISO 6396
88 dB (A)
Uncertainty (K
PA
)
3
3. According to EN ISO 4871
0.8 dB (A)
Vibration
Effective acceleration value of the upper limbs
1
1. Measurements as per 2002/44/EC, ISO EN 20643 and ISO/TR 25398 (measurement under the following conditions: exca-
vating, driving). Vehicle and attachment operation and maintenance as per Operator’s Manual. Uncertainty of measurement:
measurements as per EN 12096:1997 standard
Value of vibrations transmitted to human body specified under special operational and ground conditions. Therefore it does
not apply to a large number of applications. Therefore, the value of the vibrations transmitted to the human body (indicated
by the vehicle manufacturer in accordance with European standards) must not be used as a reference for specifying vehicle op-
erator exposure to vibrations
< 2.5
Effective acceleration value for the body
< 0.5
To Next Page
Loading...
Need help?
General
