BA DT10 en - Edition 1.5 * dt10b210.fm 2-1
Safety instructions
2 Safety instructions
2.1 Identification of warnings and dangers
Important indications regarding the safety of the personnel and the machine are identified
in this Operator’s Manual with the following terms and symbols:
Failure to observe the instructions identified by this symbol can cause injury or
death for the operator or other persons.
☞Measures for avoiding danger
Failure to observe the instructions identified by this symbol can cause damage
to the machine.
☞Measures for avoiding danger for the vehicle
This symbol identifies instructions for a more efficient and economical use of the
vehicle.
Failure to observe the instructions identified by this symbol can cause damage to the envi-
ronment. These types of dangers may be due to improper disposal of environmentally haz-
ardous substances (e.g. waste oil).
2.2 Warranty
Warranty claims can be brought forward to your Wacker Neuson dealer only.
Furthermore, the instructions in this Operator’s Manual must be observed.
2.3 Disposal
All fluids, lubricants, material, etc., used on the machine are subject to specific regulations
regarding collection and disposal. Dispose of different materials and consumables sepa-
rately and in an environmentally friendly manner!
Disposal may only be performed by a Wacker Neuson dealer. Also observe the national
regulations regarding disposal!
Avoid environmental damage! Do not allow the oil and oily wastes to get into
the ground or stretches of water!
To Next Page
Loading...
Need help?
General
