BA DT10 en - Edition 1.5 * dt10b530.fm 5-35
Maintenance
5.9 Fluids and lubricants
Component/application Fluid/lubricant Specification
Season/tempera-
ture
Capacity
1
1. Capacities indicated are no system fills
Diesel engine Engine oil
AGIP DIESEL SIGMA S 30
SAE
2
15W-40
2. According to DIN 51511
Year-round 2.5 l
Hydraulic oil reservoir
Hydraulic oil AGIP ARNICA 46
3
3. According to DIN 51524 section 3
Year-round 22.1 l
Biodegradable oil
4
4. Biodegradable hydraulic oils based on saturated synthetic esters with an iodine value of < 10 according to DIN 51524, section 3, HVLP, HEES
Panolin HLP Synth 46
FINA BIOHYDRAN SE 46
Lubrication grease
Roller and friction
bearings
5
5. KF2K-25 according to DIN 51502 multipurpose lithium grease with MoS² additive
AGIP GR SM Year-round As required
Grease zerks Multi-purpose grease AGIP GR SM Year-round As required
Fuel tank Diesel fuel
No. 2-D, DIN 51601 grade Over 4 °C
8.8 l
No. 1-D, DIN 51601 grade Below 4 °C
Radiator Coolant
Soft water + antifreeze ASTM D4985
Year-round About 3 l
Distilled water
+ antifreeze ASTM
D4985
To Next Page
Loading...
Need help?
General
