Wacker Neuson RTx-SC3 User Manual

wc_tx003818gb_FM10.fm
79
RT / RTx Engine Control Module (ECM) Diagnostics
5.6 Connecting the Diagnostic Tool—Kubota Engine Only
Use the diagnostic tool to access the diagnostic capabilities of the Engine Control
Module (ECM).
To connect the diagnostic tool:
1. Shut down the machine.
2. Open the engine compartment.
3. Remove the cap from the connector (a) on the wiring harness.
4. Plug the diagnostic tool (b) into the wiring harness.
wc_gr012423
a
b

Wacker Neuson RTx-SC3 Specifications

General

Brand	Wacker Neuson
Model	RTx-SC3
Category	Construction Equipment
Language	English