To Next Page

To Previous Page

Index

Contents

Index

Contents

CUSTOMIZING TOOL BUTTONS

Select the PEN tab to change the functions assigned to the side switch and tip of your Intuos3 pen.

Each tool button can be set to simulate a variety of mouse functions; the pull-down menus enable you to

choose the function that will be performed.

Select the function to perform

when pressing the upper or lower

side switch.

When you bring the pen tip within

6 mm (0.25 inch) of the tablet

surface without touching the tablet

and press the upper or lower side

switch, the selected function

occurs.

Hint: To make double-clicking

easier, set the side switch to

double-click automatically by

selecting DOUBLE CLICK.

Double-click here to change the

function assigned to the pen tip.

• At least one tool button

should be set to the CLICK

function.

• The tip must be set to CLICK

in order to draw in most

graphics applications.

Returns the tab settings to their

factory default conditions.

Note: For the precise placement of

right- and middle-clicks, you can

enable the SIDE SWITCH EXPERT

MODE. Select the OPTIONS...

button at the bottom of the control

panel to display the OPTIONS

dialog box. (SIDE SWITCH EXPERT

MODE is the default setting on

Tablet PCs.)

WACOM INTUOS 3 User Manual

Other manuals for WACOM INTUOS 3