76
76
Index
Contents
Index
Contents
WORKING WITH AUTOCAD
AutoCAD can support the Intuos3 tablet as a Windows system pointing device or as a Wintab compatible
digitizer. By default, AutoCAD is configured to use Intuos3 as a system pointing device. If you will be using
Intuos3 with tablet menus or to digitize drawings to proper scale, you will need to follow the procedures
below.
Note: To configure the lens cursor or mouse for left handed use in AutoCAD or similar applications, open the
Wacom Tablet control panel, click on O
PTIONS... and select LEFT in the HANDEDNESS group.
CONFIGURING AUTOCAD FOR A WINTAB COMPATIBLE DIGITIZER
1. Start AutoCAD. Open the TOOLS menu and select OPTIONS.
2. From the OPTIONS window, select the SYSTEM tab.
3. Under CURRENT POINTING DEVICE, select the Wintab compatible digitizer option.
4. Decide from which device AutoCAD will accept input. Choose an option from the ACCEPT INPUT FROM
section:
• D
IGITIZER ONLY. The AutoCAD drawing editor only accepts input from Intuos3.
• DIGITIZER AND MOUSE. The AutoCAD drawing editor accepts input from both Intuos3 and your
mouse.
5. Click OK to close the O
PTIONS window.
To Next Page
Loading...
Need help?
General