WAGNER SPRINT XE Translation Of The Original Operating Manual

Operating manual Manual Powder System SPRINT XE
7 Operation
Order number 2354920 | Edition 01/2023 33
7 OPERATION
7.1 TRAINING THE OPERATING PERSONNEL
– The operating personnel must be qualified to operate the entire system.
– The operating staff must be familiar with the potential risks associated with improper
behavior as well as the necessary protective devices and measures.
– Before work commences, the operating personnel must receive appropriate system
training.
7.2 TASKS
1. Ensure that:
4 the regular safety checks are carried out in accordance with chapter Safety Checks
[845];
4 commissioning is carried out in accordance with chapters Assembly of the manual
system [825] and Connecting the manual system [827].
7.2.1 Switching on the Manual System
0
I
EPG SPRINT X
2x
2x
0 %
100 %
kV
80
60
40
20
100
Tri Cor
5
4
3
2
1
120
80
40
20
10
10
20
30
40
50
60
70
80
90
Ø
12
10
11
9
8
m /h
2.0
3.0
0.5
0.3
0.1
1.5
3
5.5
4.5
3.5
2.5
Tri
µA
P_02646
2
A
3
1
To turn the power supply of the manual powder system on, set the mains switch (A) on the
back side of the control unit to position [I].
– After a few seconds the control unit is operational.
– The device switches to recipe1 [Surface parts] after every restart.
– To switch the manual system off or on, actuate the [Standby] push button(2).
Note:
– The fluid air must be adjusted using the throttle(3), when first commissioning the
manual system.
– The control unit automatically recognizes the type of gun connected.
– There are 50 recipes available for the gun.
– When a Tribo gun is connected, the Tribo current scale is activated, while the high-
voltage supply and control unit are deactivated.
– All airs are only switched on once the manual gun's trigger has been actuated.

WAGNER SPRINT XE Specifications

General

Brand	WAGNER
Model	SPRINT XE
Category	Paint Sprayer
Language	English