Operating manual Manual Powder System SPRINT XE
2 Using in Accordance with the Instructions
8 Order number 2354920 | Edition 01/2023
2 USING IN ACCORDANCE WITH THE INSTRUCTIONS
2.1 DEVICE TYPE
Manual powder system for manual coating of grounded work pieces.
2.2 TYPE OF USE
The Sprint XE manual system is designed for single and serial coatings for industry and trade.
WAGNER explicitly prohibits any other use!
Electrostatic manual coating systems may only be used in spray areas equipped in
accordance with EN16985:2018 or under equivalent ventilation conditions.
The components of the different versions of the Sprint XE manual system (Airfluid version, 60
L tank version) are mutually compatible.
The device may only be operated under the following conditions:
4 Use the device only to work with the materials recommended by WAGNER.
4 Only operate the device as a whole.
4 Do not deactivate safety fixtures.
4 Use only WAGNER original spare parts and accessories.
4 The operating personnel must be trained on the basis of this operating manual.
4 Follow the instructions in the operating manual.
2.3 FOR USE IN POTENTIALLY EXPLOSIVE AREAS
As defined in Directive 2014/34/EU(ATEX), the device is suitable for use in potentially
explosive areas (see Explosion protection identification [89]). In explosion hazard areas,
only use approved explosion-proof electrical devices.
2.4 PROCESSIBLE WORKING MATERIALS
– Types of powder which can be charged electrostatically
– Metallic powder
Info
Contact your local WAGNER dealer and the lacquer manufacturer if you encounter
application problems.
2.5 MISUSE
Misuse can lead to physical injury and/or property damage! Special attention must be paid
that:
4 No liquid coating products, e.g. solvents or water-based lacquers, are processed.
4 No food, medicine or cosmetics are processed.
To Next Page
Loading...
Need help?
General
