Operating manual Manual Powder System SPRINT XE
Table of Contents
4 Order number 2354920 | Edition 01/2023
6.1 Training of Assembly/Commissioning Personnel 25
6.2 Storage conditions 25
6.3 Installation Conditions 25
6.4 Assembly of the manual system 25
6.4.1 Assembly of the trolley 25
6.4.2 Assembling the control unit 26
6.5 Connecting the manual system 27
6.5.1 Connection requirements 27
6.5.2 Connecting the Airfluid manual system 28
6.5.3 Connecting the 60 L tank manual system 30
6.6 Grounding 31
6.6.1 Grounding the powder coating system 32
6.7 Safety Checks 32
7 Operation 33
7.1 Training the Operating Personnel 33
7.2 Tasks 33
7.2.1 Switching on the Manual System 33
7.2.2 Adjusting the fluidization (Airfluid) 34
7.2.3 Adjusting fluidization (60 L tank without vibrator table) 35
7.3 Factory setting recipe nos. 1–4 36
7.4 Interrupting the coating process 37
7.4.1 Airfluid version 37
7.4.2 60 L tank version 38
7.5 Performing a paint change 39
7.5.1 Airfluid version 39
7.5.2 60 L tank version 40
7.6 Double-click recipe (High Dynamic Remote) 43
8 Cleaning and Maintenance 44
8.1 Cleaning 44
8.1.1 Cleaning Personnel 44
8.1.2 Flushing and cleaning the system 44
8.2 Maintenance 44
8.2.1 Maintenance Personnel 44
8.2.2 Maintenance Instructions 44
8.2.3 Safety Checks 45
8.2.4 Maintenance Procedures 45
8.3 Periodic checking of the manual system 45
8.3.1 Airfluid version 45
8.3.2 60 L tank version 46
9 Troubleshooting and rectification 49
10 Inspections in Accordance with DIN EN 50050-2: 2013 50
10.1 Abbreviations 50
10.2 Overview Table 51
11 Disassembly and Disposal 52
11.1 Disassembly 52
11.2 Disposal 52
12 Accessories 53
12.1 Feed unit SN-2 550/10 53
12.2 Maintenance unit 53
12.3 Quick coupling set 54
To Next Page
Loading...
Need help?
General
