Xerox 4595 Copier/Printer User Guide
1-13
1. Product overview
Changing feature screen
You can customize the setting screen for the following features on
the All Services screen.
• Copy
•E-mail
• Scan to Mailbox
• Scan to FTP/SMB
For how to change settings, refer to “Copy Mode Settings” and
“Scan Mode Settings” in the System Administration Guide.
Power on/off
WARNING: Never touch a labeled area indicating High
Temperature. Contact can lead to burns.
Switch on the power before operating the machine. After the
power is on, the machine will take about 5 minutes to warm up
before you can start making copies. Turn the machine off at the
end of the day or when it is not in use for a long period of time.
Also, use Power Saving feature when not in use for a while to
reduce the power consumption.
CAUTION: Switching off the power of the machine may cause
loss of data being processed.
For information about power saving feature, refer to “Power Saver
Mode” on page 1-15.
Powering on
The procedure for turning on the power is as follows:
Open the cover and press the power switch to the | position to turn
the power on.
NOTE: The “Please wait...” message indicates that the machine
is warming up. The machine cannot be used while it is warming
up.
To Next Page
Loading...
Need help?
General