Xerox 4595 User Manual

Xerox 4595 Copier/Printer User Guide
2-41
2. Copy
 Center
Shadows in the center of documents such as booklets or
documents with facing pages are erased. You can set the center
erase width within the range from 0 to 1.9 inches (0 to 50 mm) in
0.1 inch or 1 mm increments.
 Original Orientation
Refer to “Original Orientation” on page 2-47.
Image Shift
Copies can be made with the document image position shifted to
the left, right, top, or bottom of the paper or with the document
center shifted to the center of the paper. You can also make
copies with a margin added to the top, bottom, left, or right. When
making 2 sided prints, you can set the shift positions for both Side
1 and Side 2.
NOTE: When Mixed Size Originals is set, the position is shifted
in reference to the position of the image of the first sheet of the
document.
The image shift amount is set in accordance with the
paper. Even if you set copies to be enlarged or reduced in
Reduce/Enlarge, the image shift amount is not affected.
1. On the All Services screen, select Copy, then the Scan
Options tab. From the Scan Options screen that appears,
select Image Shift.
2. Select any item.
3. Select Save to save the changes.

Xerox 4595 Specifications

General

Brand	Xerox
Model	4595
Category	Copier
Language	English