Xerox 4595 Copier/Printer User Guide
12-19
12. Specifications
List of Options
The following are the principal options available. To purchase
these, contact the Customer Support Center.
NOTE: The products are liable to change. For the latest
information, contact the Customer Support Center.
Product name Description
Optional High Capacity
Feeder (HCF)
Allows you to load papers on tray 6 and 7. A wing table to put
documents on comes with this product.
Oversized High Capacity
Feeder (OHCF)
1 tray feeding device (Tray 6) that accommodates large stock
sizes including 8.5 x 11 in /A4 up to 13 x 19 in. If installed, this
unit replaces any existing HCF.
Folder Module Enables you to output Z-folded copies.
Note: It is available when Finisher D or Finisher D2 or Booklet
Finisher D or Booklet Finisher D2 is installed.
Booklet Maker This option allows you to create Booklets with or without
saddle stitching and bi-fold. This option is available on both the
D and D2 finishers.
Printer Upgrade Kit Allows a DC (copier only) machine to be updated to a ST
(Network Print) enabled system
Mobility Plates These plates allow the Xerox 4595 system to be installed on
uneven floor or heavy carpet.
Data Security Kit This kit increases the security of data written to the hard disk.
Network Accounting Kit
(Job Base Account Kit)
Allows you to keep track of the user accounts via an external
authentication server.
To Next Page
Loading...
Need help?
General