Xerox 4595 User Manual

Xerox 4595 Copier/Printer User Guide
12-16
12. Specifications
Using PDF Direct Print
PDF direct print is a feature to print a PDF file by direct use of an
lpr command for example, without using a print driver. In this case,
the printing follows the control panel settings of the following
items.
NOTE: When using the lpr command to print, specify the number
of copies in the lpr command. The [Number of Copies] setting on
the control panel is disabled. Note that if the number of copies is
not specified in the lpr command, one copy is printed.
NOTE 2:When using the lpr command to print a PDF file, it is
necessary to start the LPD protocol on the machine, using the
control panel or CentreWare Internet Services.
Setting Items for the PDF Direct Print Feature
This section describes the setting items for the PDF direct print
feature.
These settings are valid when printing a PDF file without using the
Fuji Xerox ContentsBridge utility.
NOTE: When using the Contents Bridge Utility to print a PDF file,
refer to the manual within the CentreWare Utilities CD-ROM.
Number of copies output Layout
Duplex printing Paper size
Printing mode Print processing mode
Sorting
Setting item
Item
number
Setting values
Number of
copies output
401 Sets the number of copies to be printed.
[1 - 999] (default: 1) : 1 - 999 copies
Duplex 402 Selects duplex printing.
[0] (default) : No
[1] : Flip on Long Edge
[2] : Flip on Short Edge
Flip on Long Edge means duplex printing so that when the paper is bound
along the long edge, the orientation is correct for reading.
Flip on Short Edge means duplex printing so that when the paper is
bound along the short edge, the orientation is correct for reading.
This feature does not appear for some models. An optional package is
necessary. For details, contact our Customer Support Center.

Xerox 4595 Specifications

General

Brand	Xerox
Model	4595
Category	Copier
Language	English