Xerox 4595 User Manual

Xerox 4595 Copier/Printer User Guide
11-91
11. Problem Solving
Solving Curled Output
You can correct curling of the output by pressing the De-curl
button.
The De-curl button functions both in operation and while the
machine is idle if the power of the machine is on.
NOTE: To change the curling correction mode while the machine
is in operation, press the De-curl button and then the change will
be applied immediately.
Pressing the Reset button cannot change the curling
correction mode.
1. Check how the output copy is curled.
2. Check the De-curl lights.
When turning on the power of this machine, the de-curl
mode is set to Auto.
When you cancel the Power Saver Mode, the de-curl
mode will be set to Auto.
3. Press De-curl.
NOTE: Pressing the De-curl button toggles the mode between
Auto, ON, and OFF.
For more information, refer to “Mode and function of De-curl

Xerox 4595 Specifications

General

Brand	Xerox
Model	4595
Category	Copier
Language	English