Xerox Scanner User’s Guide 87
Scanning from the TWAIN Interface
7. Make sure the option Display scanner dialog box is selected.
If this option is not selected, the TWAIN interface will not open
when you click the Scan button. Instead, the items are scanned
with the basic PaperPort settings. Documents are scanned in
Black and White in the .pdf file format, and Photographs are
scanned in Color in the .jpg file format.
8. Click the Scan button on the Scan pane.
The TWAIN interface opens You’re ready to start scanning.
Getting Help with the PaperPort Software
The PaperPort software includes a complete set of help topics that
answer questions about each feature of the software. To open the
Help Topics window, press the F1 key or choose PaperPort Help
from the Help menu.
You can also refer to the PaperPort Getting Started Guide and
PaperPort User’s Guide on the Installation CD.
NOTE: Please wait a few moments for your selection to
become active. This delay only occurs the first time you select a
scanner while PaperPort initializes it. Later on, the scanner
initializes immediately when you select it.
NOTE: If the Scan button at the bottom of panel is not available
when you make a selection, then PaperPort needs to be set up
to work with your scanner. See the section, “Setting Up
PaperPort to Work with Your Scanner” on page 103.
NOTE: The interface that opens—Basic or Advanced—is the
one you were using the last time you opened the TWAIN
interface.
To Next Page
Loading...
Need help?
General