Xerox Color 1000 Press User Manual

Tray Options
Use this feature to change the factory default settings for the following:
• Auto Tray Switch Timing: Allows the machine to automatically select another paper
tray containing the appropriate paper, if the selected paper tray becomes unusable,
depending on tray paper level status. Two options are available:
- Tray Near Empty
- Tray Empty
• Auto Tray Switch Method: Instructs the machine to automatically switch trays in a
specific order; options include:
- Always check from priority 1: When a tray runs out of paper, this option tells the
machine to always check the tray listed as Priority 1 before checking other available
trays.
- Check in a fixed order: This option tells the machine to check the next higher
priority tray; for example, if the paper being fed is from tray 2 and runs out of
paper, the machine then checks the tray listed in sequential order after tray 2 in
the priority list. The machine continues to check the trays in the priority list in
sequential order until a tray is found with the same stock requirements.
Note
If a tray with the same stock requirements is not found, the machine displays a
message to load the required paper.
5-19
Xerox
®
Color 800/1000 Press
System Administration Guide
System Settings

Xerox Color 1000 Press Specifications

General

Brand	Xerox
Model	Color 1000 Press
Category	Printer
Language	English