Xerox Color 1000 Press User Manual

b) Continue Adjusting: Select this if the output does not meet customer satisfaction
and requires further adjusting.
This returns you to the The Fold Adjustment - Test Print window where you can
make further adjustments and run additional test prints. Repeat this step as
required until the desired output is achieved. The new/edited fold adjustment
profile is displayed in the Fold Adjustment window.
16. Select Close to exit Profiles and return to the main UI.
17. Select Logoff to exit the Administrator mode.
Related Topics:
Logging on as Administrator
New/edit bi-fold multiple sheets stapled adjustment procedure
The following procedure provides the basic steps required for creating a new or editing
an existing bi-fold adjustment profile for multiple sheets that are stapled.
Note
The Fold Adjustment feature is available only when the Standard Finisher, Booklet Maker
Finisher, or Standard Finisher Plus is attached to your machine.
1. Logon as Administrator.
2. Select the Profiles button.
The Profiles window opens.
3. Select the Fold Adjustment tab.
The Fold Adjustment option is displayed.
4. Select either the New or Edit button.
If you area editing an existing fold adjustment, select the desired profile from the
list and then select the Edit button.
Xerox
®
Color 800/1000 Press
6-16
System Administration Guide
Profiles

Xerox Color 1000 Press Specifications

General

Brand	Xerox
Model	Color 1000 Press
Category	Printer
Language	English

Summary

Administrator Overview

Logging On as Administrator

Procedure to enter and exit the Administrator mode.

Remote Services

Information about the Xerox remote services program and its features.

Automatic Meter Reading (AMR)/Automatic Supplies Replenishment (ASR)

Details on AMR and ASR features, including RemoteAssistant.

Technical Key Operator (TKO)

Details on the TKO role, Xerox Productivity Plus (XPP) program, and training.

Backing Up and Transferring the Stock Library

Procedure to back up or transfer the stock library using a USB flash drive.

Maintenance on UI

Maintenance Tab

Window displaying options for cleaning machine components like corotrons and toners.

Test Print Option

Using the Test Print Option

Procedure to select Advanced Stock Setup options for evaluating printed output.

Test Print Option for 2nd Bias Transfer Roll

How to run test prints for the 2nd Bias Transfer Roll adjustment.

Evaluating Test Prints

Steps to review generated test prints for best image quality.

Adjusting Test Prints

Procedure to rerun test prints for further adjustments after initial evaluation.

Paper Curl Correction

Paper Curl Overview

Explains the causes of paper curl and why adjustments are needed for output.

Paper Curl Correction Options

Details on settings for 1-sided face-up, 1-sided face-down, and 2-sided output.

1 Sided-Face Up Option

Settings for one-sided print jobs exiting the machine in the face-up position.

1 Sided-Face Down Option

Settings for one-sided print jobs exiting the machine in the face-down position.

2 Sided Option

Settings for two-sided print jobs to correct paper curl.

System Settings

User Interface Settings

Configuration of Fault Details Window, Default Language, and password management.

Setting the Date and Time

Procedure to set the system date and time displayed on machine screens.

System Configuration

Settings for Productivity Mode, Power Saver, Auto Logoff, and Attention Sounds.

Tray Options

Settings for automatic tray switching, priority, and timeout.

Output Devices

Configuration for attached finishing devices like High Capacity Stackers or Perfect Binders.

Image Quality Settings

Defaults for achieving maximum image quality, including Fuser Belt Refresh.

Full Width Array Overview

Feature for scanning and correcting registration, density, and color errors.

Profiles

Alignment Profiles

Creating and customizing profiles for image registration, magnification, and skew.

Fold Adjustment

Adjusting fold positions for various paper types and default fold types.

Finishing Devices

Profile feature for third-party Digital Finishing Architecture (DFA) devices.