Xerox Color 1000 Press User Manual

16. Select either:
a) Done Adjusting: Select this if the output meets customer satisfaction.
This closes the current window and returns you to the main Fold Adjustment
window. The new/edited fold adjustment profile is displayed in the Fold Adjustment
window.
b) Continue Adjusting: Select this if the output does not meet customer satisfaction
and requires further adjusting.
This returns you to the The Fold Adjustment - Test Print window where you can
make further adjustments and run additional test prints. Repeat this step as
required until the desired output is achieved. The new/edited fold adjustment
profile is displayed in the Fold Adjustment window.
17. Select Close to exit Profiles and return to the main UI.
18. Select Logoff to exit the Administrator mode.
Related Topics:
Logging on as Administrator
New/edit c-fold adjustment procedure
The following procedure provides the basic steps required for creating a new or editing
an existing c-fold adjustment profile.
Note
The Fold Adjustment feature is available only when the Standard Finisher, Booklet Maker
Finisher, or Standard Finisher Plus is attached to your machine.
Xerox
®
Color 800/1000 Press
6-18
System Administration Guide
Profiles

Xerox Color 1000 Press Specifications

General

Brand	Xerox
Model	Color 1000 Press
Category	Printer
Language	English