Xerox Color 1000 Press User Manual

High Capacity Stacker Settings
Use the Output Devices feature to set specific HCS output settings, including:
• Auto Output Switching: This option sets whether or not to allow the automatic
switching of the output destination from a full HCS to second HCS while jobs are
printing or when the Unload button on the HCS is pressed.
- Enable: Select this setting to allow the job output to automatically switch from
one HCS to another HCS.
- Disable: This is the default setting. Select this option if you do not want automatic
switching from one HCS to another HCS during print jobs.
Note
The Auto Output Switching and Auto Output Switching Priority options are available
ONLY when there is more than one HCS attached to the machine.
• Auto Output Switching Priority: Set the priority order each attached HCS.
• Unload Timing: This option sets how the HCS Unload button functions.
- Unload at set boundary: Selecting this option causes the HCS to stop after
delivering output at the end of the set when the Unload button is pressed.
- Unload immediately: Selecting this option causes the HCS to stop after delivering
the scheduled paper immediately when the Unload button is pressed. This may
occur in the middle of a job set, and the last set delivered may not be a complete
set.
Note
If more than one HCS is attached to the machine, the option selected here applies
to all of them.
Perfect Binder Settings
Select the desired settings for the Perfect Binder power saver mode:
• Glue Heater Timeout: Select a time interval for when the adhesive unit shuts off and
the binder enters power saver mode after the last job in the queue was completed.
The time interval represents a period of system inactivity without any jobs printing
or any jobs in the queue waiting to be printed. Choose between 1-240 minutes. The
default setting is 10 minutes.
• Manual Feed Timeout: Select a time interval for when the adhesive unit shuts off
and the binder enters power saver mode after the last manual feed job was completed.
The time interval represents a period of system inactivity without any jobs printing
or any jobs in the queue waiting to be printed. Choose between 1-240 minutes. The
default setting is 10 minutes.
Selecting the Output Device options
1. Logon as Administrator.
Xerox
®
Color 800/1000 Press
5-22
System Administration Guide
System Settings

Xerox Color 1000 Press Specifications

General

Brand	Xerox
Model	Color 1000 Press
Category	Printer
Language	English